 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STGP7NB60F - STGD7NB60F N-CHANNEL 7A - 600V - TO-220 / DPAK PowerMESHTM IGBT PRELIMINARY DATA TYPE STGP7NB60F STGD7NB60F s s s s s s s VCES 600 V 600 V VCE(sat) (Max) @25C < 2.4 V < 2.4 V IC @100C 7A 7A 3 3 1 2 HIGH INPUT IMPEDANCE LOW ON-VOLTAGE DROP (Vcesat) OFF LOSSES INCLUDE TAIL CURRENT LOW GATE CHARGE HIGH CURRENT CAPABILITY HIGH FREQUENCY OPERATION ADD SUFFIX "T4" FOR ORDERING IN TAPE & REEL (DPAK) 1 TO-220 DPAK DESCRIPTION Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding perfomances. The suffix "F" identifies a family optimized to achieve very low switching switching times for frequency applications (<40KHZ) INTERNAL SCHEMATIC DIAGRAM APPLICATIONS MOTOR CONTROLS s SMPS AND PFC AND BOTH HARD SWITCH AND RESONANT TOPOLOGIES s ABSOLUTE MAXIMUM RATINGS Symbol VCES VGE IC IC ICM ( ) PTOT Tstg Tj Parameter TO-220 Collector-Emitter Voltage (VGS = 0) Gate-Emitter Voltage Collector Current (continuous) at TC = 25C Collector Current (continuous) at TC = 100C Collector Current (pulsed) Total Dissipation at TC = 25C Derating Factor Storage Temperature Max. Operating Junction Temperature 80 0.64 - 55 to 150 150 600 20 14 7 56 70 0.56 Value DPAK V V A A A W W/C C C Unit ( ) PULSE WIDTH LIMITED BY SAFE OPERATING AREA June 2003 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/8 STGP7NB60F - STGD7NB60F THERMAL DATA TO-220 Rthj-case Rthj-amb Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max 1.56 62.5 DPAK 1.78 100 C/W C/W ELECTRICAL CHARACTERISTICS (TCASE = 25 C UNLESS OTHERWISE SPECIFIED) OFF Symbol VBR(CES) ICES IGES Parameter Collectro-Emitter Breakdown Voltage Collector cut-off (VGE = 0) Gate-Emitter Leakage Current (VCE = 0) Test Conditions IC = 250 A, VGE = 0 VCE = Max Rating, TC = 25 C VCE = Max Rating, TC = 125 C VGE = 20V , VCE = 0 Min. 600 10 100 100 Typ. Max. Unit V A A nA ON (1) Symbol VGE(th) VCE(sat) Parameter Gate Threshold Voltage Collector-Emitter Saturation Voltage Test Conditions VCE = VGE, IC = 250A VGE = 15V, IC = 7 A VGE = 15V, IC= 7 A, Tj =125C Min. 3 2 1.5 Typ. Max. 5 2.4 Unit V V V DYNAMIC Symbol Cies Coes Cres Qg Qge Qgc ICL Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Latching Current VCE = 480V, IC = 7 A, VGE = 15V Vclamp = 480 V Tj = 125C , RG = 10 37 4 18 28 Test Conditions VCE = 25V, f = 1 MHz, VGE = 0 Min. Typ. Max. 540 80 13 50 Unit pF pF pF nC nC nC A SWITCHING ON Symbol td(on) tr (di/dt)on Eon Parameter Turn-on Delay Time Rise Time Turn-on Current Slope Turn-on Switching Losses Test Conditions VCC = 480 V, IC = 7 A RG = 10 , VGE = 15 V VCC= 480 V, IC = 7 A RG=10 VGE = 15 V,Tj =125C Min. Typ. 17 6 900 60 Max. Unit ns ns A/s J 2/8 STGP7NB60F - STGD7NB60F ELECTRICAL CHARACTERISTICS (CONTINUED) SWITCHING OFF Symbol tc tr(Voff) td(off) tf Eoff(**) Ets tc tr(Voff) td(off) tf Eoff(**) Ets Parameter Cross-over Time Off Voltage Rise Time Delay Time Fall Time Turn-off Switching Loss Total Switching Loss Cross-over Time Off Voltage Rise Time Delay Time Fall Time Turn-off Switching Loss Total Switching Loss Vcc = 480 V, IC = 7 A, RG = 10 , VGE = 15 V Tj = 125 C Test Conditions Vcc = 480 V, IC = 7 A, RG = 10 , VGE = 15 V Min. Typ. 190 45 110 140 240 290 410 135 205 300 650 625 Max. Unit ns ns ns ns J J ns ns ns ns J J Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by max. junction temperature. (**)Losses include Also the Tail (Jedec Standardization) 3/8 STGP7NB60F - STGD7NB60F Fig. 1: Gate Charge test Circuit Fig. 2: Test Circuit For Inductive Load Switching 4/8 STGP7NB60F - STGD7NB60F TO-220 MECHANICAL DATA mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 oP Q 5/8 STGP7NB60F - STGD7NB60F TO-252 (DPAK) MECHANICAL DATA mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0 o DIM. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 inch MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 1.00 8 o TYP. TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398 0.8 0.024 0 o 0.039 0o P032P_B 6/8 STGP7NB60F - STGD7NB60F DPAK FOOTPRINT TUBE SHIPMENT (no suffix)* All dimensions are in millimeters All dimensions are in millimeters TAPE AND REEL SHIPMENT (suffix "T4")* REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 1.85 7.6 2.75 4.1 8.1 2.1 16.3 BASE QTY 2500 mm MIN. 6.8 10.4 MAX. 7 10.6 12.1 1.6 inch MIN. MAX. 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 * on sales type 7/8 STGP7NB60F - STGD7NB60F Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. (c) http://www.st.com 8/8 |
Price & Availability of STGP7NB60F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |